background image

14

AFTER SALES SUPPORT

 

[email protected]

 

 

1300 855 831

MODEL: HCE2500 PRODUCT CODE: 64124 03/2019

AUS

Safety regulations

HCE2500

5. Service

• 

Have your power tool serviced by a qualified repair person using only identical 

replacement parts. This will ensure that the safety of the power tool is maintained.

•  If the supply cord is damaged, it must be replaced by the manufacturer, its service 

agent or similarly qualified persons in order to avoid a hazard.

Electrical safety:

m

 

Caution: to avoid accidents and injuries from electric shocks:

•  The plug and socket of an extension cable must be water-tight!

Unsuitable extension cables can be dangerous as people can be harmed 

by an electric shock!

•  Protect the electric plug connections against moisture.

• 

If there is a risk of flooding, fix the plug connections in an area that is safe from 

flooding.

• 

Ensure that the mains voltage matches the specifications on the rating plate.

•  Connection to the mains must be carried out by an experienced electrician and 

meet the requirements of the Australian standards.

•  The electrical installation shall be according to national wiring rules.

•  The device must only be connected to a mains socket via a residual-current circuit 

breaker (RCD) with a rated leakage current of not more than 30 mA. Fuse: at least 

13 ampere.

•  Before each use, check the high pressure washer, cable and plug for damage.

•  If the power cable for this high pressure washer is damaged, it must be replaced 

by the manufacturer, a customer service agent of the same or a similarly qualified 

person in order to prevent hazards.

•  Do not pull the plug from the socket by the cable. Protect the cable from heat, oil 

and sharp edges.

Summary of Contents for WORKZONE HCE2500























Reviews: