32
2-in-1 Chainsaw with Telescopic Pole
AFTER SALES SUPPORT
e-mail: [email protected]
1300 889 028
MODEL: N
o
.
705156 · 03/2021 · GCS250F
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]
1300 889 028
MODEL: N
o
.
705156 · 03/2021 · GCS250F
Lubricating sprocket
WARNING: Wear heavy-duty gloves when
performing any maintenance or service
to this chainsaw. Always unplug the
chainsaw before performing any service or
maintenance on this chainsaw.
It is not necessary to remove the chain or bar when
lubricating the guide bar sprocket.
1. Clean the bar and sprocket.
2. Using a grease gun, insert the tip of the gun into the lubrication hole and
inject grease until it appears at the outside edge of the sprocket tip (Fig W).
3. To rotate the sprocket pull the chain by hand until the ungreased side
of the sprocket is in line with the grease hole. Repeat the lubrication
procedure.
W
Transportation and Storage
Always fit the blade protection cover (27) when the chainsaw is not in use.
It is recommended to drain the oil from the chainsaw on the completion of
use, prior to storage or transportation.
Always sit the chainsaw on a surface where the leakage of oil will not be a
problem.
Always store the chainsaw in an area safe away from the elements of the
environments, i.e. high humidity, wet locations, hot environments etc.
Storage area should also be out of reach of children of both the chainsaw
and all accessories.
Store the chainsaw ensuring the blade protection cover (27) securely
covers the chain (6) and guide bar (7). The chainsaw should always be
stored with the On/Off switch (2) in the ‘Off’ position.
If the chainsaw is to be stored for a long period of time it is advisable to
apply a thin spray of oil over the chain (6), guide bar (7) and all exposed
metal parts.
The chainsaw should be thoroughly cleaned of all wood chips, dirt etc prior
to storage.
