manualshive.com logo in svg

ALDI 705156, User Manual

Share
Download
ALDI 705156 User Manual Download Page 33

30

2-in-1 Chainsaw with Telescopic Pole

AFTER SALES SUPPORT

e-mail: [email protected]

1300 889 028

MODEL: N

o

. 

705156 · 03/2021 · GCS250F

(toll free)

AFTER SALES SUPPORT

(toll free)

e-mail: [email protected]

1300 889 028

MODEL: N

o

. 

705156 · 03/2021 · GCS250F

WARNING: 

Use only the manufacturer’s recommended replacement 

parts and accessories. Use of any other parts may create a hazard or 

cause product damage.

NOTE:

 This product is not suitable for repair or maintenance work by the 

unskilled person. The following detail explains how the product is cleaned, 

and basic maintenance / safety checks. 
All other maintenance work must be carried out by service agents who are 

experienced with both the mechanical and electrical aspects of this product. 

NOTE:

  Before cleaning your chain saw or carrying out any maintenance 

procedures, make sure that the chainsaw is off and is cool.
Disconnect the plug from the mains power socket to prevent accidental 

starting.  Maintenance should be performed before and after each use.  If 

the chainsaw is dropped or appears to suffer any other significant impact, it 

is highly recommended to perform all maintenance tasks before operation, 

and if there appears to be an issue, refer to the troubleshooting chart, or 

take to an authorised service agent.
If the replacement of the supply cord is necessary, this has to be done by the 

manufacturer or his agent in order to avoid a safety hazard.

Saw chain maintenance

Follow maintenance instructions in this manual. Proper cleaning of saw and 

chain and guide bar maintenance can reduce chances of kickback. Inspect 

and maintain saw after each use. This will increase the service life of your 

saw.

NOTE: 

Even with proper sharpening, risk of kickback can increase with each 

sharpening.

Signs of a dull chain are:
•   The sawdust becomes powder-like 
•   Extra force is required to execute a cut
•   The cut does not track in a straight line 
•   Increased vibration
•   Increased fuel consumption

Maintenance

Summary of Contents for 705156













































Reviews:

No comments

Brands by name

Popular brands

Load more brands