manualshive.com logo in svg

ALDI 705156, User Manual

Share
Download
ALDI 705156 User Manual Download Page 22

19

2-in-1 Chainsaw with Telescopic Pole

AFTER SALES SUPPORT

e-mail: [email protected]

1300 889 028

MODEL: N

o

. 

705156 · 03/2021 · GCS250F

(toll free)

AFTER SALES SUPPORT

(toll free)

e-mail: [email protected]

1300 889 028

MODEL: N

o

. 

705156 · 03/2021 · GCS250F

4. The chain will stretch from use and lose proper tension. To retension the 

chain, turn knob anti-clockwise (3x), secure the chain drive side cover (9), 

and repeat steps 1 – 3 listed on the previous page.

Lubrication

Important: The chainsaw is not supplied filled with oil*. It is essential 

to fill with oil before use. Never operate the chainsaw without chain 

oil or at an empty oil tank level as this will result in extensive damage 

to the product. Chain life and cutting capacity depend on optimum 

lubrication. Therefore, the chain is automatically oiled during 

operation via oil outlet.

WARNING:  Unplug chainsaw from the mains power outlet 

socket before undertaking this task.

WARNING:  Never start work unless the chain (6) and guide bar (7) 

are lubricated.

Filling oil tank

1.   Rest the chainsaw on its side so the oil tank is facing up, on the ground or a 

secure surface and wipe any debris from around the oil tank.

2.   Remove the oil filler cap (3) by rotating in an anti-

clockwise direction (Fig B1).  Wipe the underside 

of the oil filler cap (3) to ensure it is clean and dry.

3.   Using a funnel, fill the oil tank with 120ml of good 

quality chain and bar oil (not supplied). Or to just 

under the lip of the oil tank opening.

4.   Fasten the oil filler cap (3) and tighten, and if there 

is any spillages, ensure you clean with a clean rag.

WARNING: Only use oil that is mentioned in the manual. We 

recommend good quality chain and bar oil (not supplied). Poor 

quality oil will damage the tool.

WARNING: Before storing the chainsaw for an extended period, 

empty the oil tank.

* Oil is not included with this product

B1

Summary of Contents for 705156













































Reviews:

No comments

Brands by name

Popular brands

Load more brands