21
August 31, 2018
FIRMWARE UPDATE
All attempts have been made to retain backwards compatibility.
Firmware Update is not a risk-free process, although all precautions have been taken to avoid catastrophic failures.
The update should only be performed if needed. To obtain the latest firmware, please visit our website,
www.alcorn.com
FIRMWARE UPDATE PROCEDURE
Enter Firmware Update Mode by selecting V-Page
product in AMI Terminal and clicking “Enter Firmware Update
Mode” button under Setup tab.
V-Page will retain current IP in this mode.
Alternatively, see Failsafe Recovery if unable to enter Firmware Update Mode remotely (see troubleshooting guide
at the end of this manual).
Once Firmware Update Mode is activated (rapidly blinking GREEN LEDs on VP4X or patterned group blinking on
VP12/32 models) and the unit gets a link light, navigate to the last known IP in your favorite browser to display the
Firmware Loader web interface; example:
http://192.168.0.20
Press “Browse” to select the
V-PAGE
.NEW file obtained earlier from alcorn.com and click “Update Firmware” to
perform the update.
Update process may take up to a minute to complete. Then, V-Page will restart automatically (blinking LEDs until
QSYS is detected). Update complete!
