18
August 31, 2018
Q-SYS V-PAGE PLUGIN: PROPERTIES TAB
•
Model:
The user can select the proper model number of each station.
•
PA Router Input:
The input number to the PA Router component.
•
Station Name:
User defined name of each station.
•
Default Zone Timeout:
The amount of time in seconds set by the user before going back
to the default zone set by the Default button.
•
Pulse Duration:
Value in milliseconds of LED buttons blinking
•
Zone Select Blink Rate:
The amount of time in milliseconds for all the buttons once is
selected.
•
PTT Mode:
The user can enable the microphone by press and hold a zone button (Zone
Button mode) or by choosing Mic Button mode.
•
Control IP Address:
The IP address of the network control of the unit entered by the
user or fully populated once an IP is being assigned by a switch in DHCP mode.
•
Control Subnet Mask:
The subnet mask of the control network of the unit.
•
Control Gateway:
The gateway settings of the control network.
•
Audio Mode:
User defined setting if hardware allows it. Can either be Dante or AES67.
•
Audio IP:
The IP address of the audio network of the unit entered by the user or fully
populated once an IP is being assigned by a switch in DHCP mode.
•
Audio Subnet Mask:
The subnet mask of the audio network of the unit.
•
Audio Gateway:
The gateway settings of the audio network.
