17
August 31, 2018
17.
Button Function:
Use this to assign zones to the V-Page buttons. These zones can be administered
through Q-sys administrator
18.
Default Button:
This setting allows you to select which zone button the station will select once a page
is complete.
19.
Active:
LED will light up when the zone is in use.
20.
Light:
Will replicate the current condition of the button (Red: Busy. Green: Ready to page)
21.
State LED
:
•
Breakaway Mode:
Determines the mode of the station buttons.
•
Off:
Operate as a regular zone selection button
•
Toggle:
When pressed, the control pin ‘Breakaway State LED’ will toggle states. (01), 10).
This can be used to interface to other control pins within Q-sys like mute functions. In this
mode, the button LED will represent the state of the ‘Breakaway State LED’ control pin.
•
Trigger:
This is like the toggle mode except that the control pin ‘Breakaway State LED’ will
momentarily pulse to a value of 1. In this mode, the V-Page button LED can be manually
controlled using the control pin ‘Breakaway Input LED’.
