Page 54
March 23, 2012 • Alcorn McBride ProTraXX User’s Manual • Rev 1.4
Version Request
Description:
This command is used request the operating system version.
Command Bytes:
?V
Message Response:
ProTraXX x.x.x
Where x.x.x is the current version of the installed firmware.
Example:
Get current version.
?V
Note
: The firmware version can also be obtained from the LCD menu.
Soft Reset
Description:
This command issues a software reset to the unit.
Command Bytes:
XX
Message Response:
R
Example:
Reset Unit.
XX
Set Name
Description:
This command gets/sets the user-readable name of the unit.
Command Bytes:
<n>NM
Parameters:
<
n>
is the desired ASCII name of the unit
Message Response:
R
Minimum OS Version:
TraXXOS 1.2.5
Comments:
To get the current name of the unit, send
NM
without the
<n>
parameter.
Examples:
Set unit name to “myTraXX”.
myTraXXNM
Get the current unit name.
NM
