March 23, 2012 • Alcorn McBride ProTraXX User’s Manual • Rev 1.4 •
Page 49
Aux Input to Channels
Description:
This command will route the audio being received on the ProTraxx’s auxiliary inputs
to the specified channel, channel pair, or channel group.
Command Bytes:
CL<d>PL
Parameters:
<d>
is either
C
followed by a channel number in ASCII,
P
followed by a channel
pair number in ASCII, or
G
followed by a channel group number in ASCII
Comments:
Channel numbers range from 1 through 16, Channel Pairs from 1 through 8, and
Channel Groups from 1 through 13. Use “*” for All Channels.
Message Response:
R
Examples:
Route Aux Input to Channel Pair 2.
CLP2PL
Route Aux Input to Channel Group 4.
CLG4PL
Route Aux Input to All Channels.
CL*PL
Add Channels to Channel Group
Description:
This command will create a group from the specified channels. This allows you to
control the grouped channels as one.
Command Bytes:
A
<n>C<#,#,#>GR
Parameters:
<
n>
is the channel group number(1-16)
<#,#,#>
are the channels to be added to the group, separated by commas. (up to 16)
Comments:
To clear the group, issue the command with no channels listed after
P
Message Response:
R
Examples:
Add channel pairs 2,3,6 to Group 3.
A3C2,3,6GR
Clear group 6.
A6CGR
