March 23, 2012 • Alcorn McBride ProTraXX User’s Manual • Rev 1.4 •
Page 29
Add/Edit Event
Now for the fun part! Click on
Add
to add a trigger event to one of the
inputs, buttons, or input groups. The Add/Edit Event window will appear.
The best way to make the ProTraXX to play a file on startup is to select the
Device Powered On
Trigger Type.
Once you have chosen where the event is being triggered from, you can select either
an
Active On
or
Active Off Trigger Edge
. This allows the ProTraXX to respond to
either normally-open or normally-closed input sources.
In the
Event
field you specify exactly what action you want the Event to
perform. You can have it play a file or you can specify a
Custom Command
,
where you can use any command out of the Command Reference in this
manual.
The Configuration File
is named
“CONFIG.LST” which
the ProTraXX always
loads on startup.
Click
Add
once you’ve finished making your choices and the trigger will be added
to the ProTraXX configuration file.
Now you need to save your file. To do this select File…Export Configuration…
and choose the destination. You can copy it to your hard drive and then copy it to
the ProTraXX Compact Flash and insert it into the unit.
Select One of the 16 Front Panel Buttons
Select One of the 16 Rear Panel Buttons
(note: any inputs previously assigned to Input Groups will
not appear in the list)
Select One of the Input Groups
(if any are assigned)
OR
OR
OR
Select “Device Powered On” to make the event happen
on bootup.
