Alcorn Mcbride Digital Video Machine 4, User Manual

Page: 17 / 84

Rear Panel 9
Rear Panel
Composite Video (Breakout Cable)
There is one RCA Composite Video connector available for each channel of the
DVM4. These can be found on the 25-Pin Breakout cable provided with the
DVM4. Be sure that this cable is securely connected in the connector labeled
“Audio/Video Breakout”.
Unbalanced Audio (Breakout Cable)
Each DVM4 channel has two analog RCA connectors located on the 25-pin
breakout cable.
NOTE: These connectors are not functional when a Dolby Digital 5.1 bitstream
is being played.
Digital Audio (Breakout Cable)
The breakout cable also provides one RCA digital audio connector for each
channel. These connectors will output S/PDIF and Dolby Digital 5.1 bitstream
audio signals.
High-Density RGB (Breakout Cable)
The HDB-15 Female connectors found on the second breakout cable provide
RGB, YUV, S-Video, and Composite video plus H-Sync and V-Sync. The
pinouts for this connector depends on which video mode is currently active.
See
the diagrams on the next page .
It is important to verify your monitor
can display the currently selected Video Mode (NTSC by
default). Not all monitors are capable of displaying all of these
modes.