ALCOLOCK LR
49
22.3 OBD-II SELECT
1. OBD SELECT is automatically displayed.
NOTE:
•
For conventional / non-hybrid vehicles, the ALCOLOCK LR
device must obtain a tach (rpm) reading from under the
hood.
•
For non-hybrid vehicles with OBD-II, a tach signal may be
obtained by connecting the ECU to vehicle OBD-II.
•
For hybrid vehicles, tach is not available – an OBD-II speed
threshold is already programmed into the software. The ECU
must be connected to the vehicle OBD-II source.
2. Press Select to scroll to one of the 3 following options:
OBD / TACH
For non-hybrid vehicles connected to OBD-II.
OBD / SPEED
For hybrid vehicles connected to OBD-II.
NO OBD
For vehicles not connected to OBD-II, and instead
connected to a direct tach source under the hood.
3. After the correct option has been selected, based on the
vehicle and connection type, press OK.
Read only one of the following sections of this manual,
based on the step 2 selection:
•
OBD / TACH – section 22.3.1
•
OBD / SPEED – section 22.3.2
•
NO OBD – section 22.3.3
OBD SELECT
OBD/TACH
Exit
OK?
Select
OBD SELECT
OBD/TACH
Exit
OK?
Select
OBD SELECT
OBD/SPEED
Exit
OK?
Select
OBD SELECT
NO OBD
Exit
OK?
Select
