ALCOLOCK LR
21
14. Turn the key to the start position.
The vehicle engine will start because the Relay is On.
Start Engine is briefly displayed. Continue to the next
section.
16.2 OBD-II SELECT
1. OBD SELECT is automatically displayed.
NOTE:
•
For conventional / non-hybrid vehicles, the ALCOLOCK LR
device must obtain a tach (rpm) reading from under the
hood.
•
For non-hybrid vehicles with OBD-II, a tach signal may be
obtained by connecting the ECU to vehicle OBD-II.
•
For hybrid vehicles, tach is not available – an OBD-II speed
threshold is already programmed into the software. The ECU
must be connected to the vehicle OBD-II source.
2. Press Select to scroll to one of the 3 following options:
OBD / TACH
For non-hybrid vehicles connected to OBD-II.
OBD / SPEED
For hybrid vehicles connected to OBD-II.
Start Engine
OBD SELECT
OBD/TACH
Exit
OK?
Select
OBD SELECT
OBD/TACH
Exit
OK?
Select
OBD SELECT
OBD/SPEED
Exit
OK?
Select
