2600 series Hydraulic Tooling
(HK914)
Alcoa Fastening Systems
6
R
P
1.204
30.58
1.687
42.85
5.157
130.99
9.422
239.32
6.915
175.65
2.513
63.82
ø
2.638
66.99
ø
1.810
45.96
ø
1.319
33.5
10°
INCHES
mm
S
S
PECIFICATIONS
PECIFICATIONS
POWER SOURCE:
Huck POWERIG Hydraulic Unit
HOSE KITS:
Use only genuine HUCK Hose Kits rated @ 10,000
psi working pressure.
HYDRAULIC FLUID:
ATF meeting DEXRON III, DEXRON IV, MERCON,
Allison C‐4 or equivalent specifications.
Fire resistant hydraulic fluid may also be used,
and is required to comply with OSHA regulation
1926.302 paragraph (d): "the fluid used in
hydraulic power tools shall be fire resistant fluid
approved under schedule 30 of the US Bureau of
Mines, Department of Interior, and shall retain its
operating characteristics at the most extreme
temperatures to which it will be exposed."
MAX OPERATING TEMP:
125°F (51.7°C)
MAX FLOW RATE:
2 gpm (7.5 l/m)
MAX INLET PRESSURE:
7400 psi (510 bar)
PULL CAPACITY:
20,020 lbs (89.05 kN) @ 7400 psi
STROKE:
1.25 inches (3.18 cm)
WEIGHT:
7.3 lbs (3.31 kg)
