44
Files and Directories
October 2006
Working and Certified Are Different
If the software in the
/flash/working
directory differs
even
slightly
from the software in the
/flash/certified
directory, the
switch will automatically run from the
/flash/certified
direc-
tory.
When the switch runs from the
/flash/certified
directory,
configuration changes
cannot
be saved via the
write memory
command
My Working and Certified directories are different. Can
I force a reboot from the Working directory?
Yes. If its configuration and image files are known to be reli-
able, you can override the default and initiate a reboot from the
/flash/working
directory. This is done via the
reload working
command. For more information, refer to
your
OmniSwitch CLI Reference Guide
.
Note.
For detailed information on using directories, refer
to the “Managing CMM Directory Content” chapter in the
OmniSwitch 6800/6850/9000 Switch Management Guide
.
Working
Directory
revised_boot.cfg
Hbase.img
Hrelease.img
Etc.
Certified
Directory
boot.cfg
Hbase.img
Hrelease.img
Etc.
Certified
Directory
boot.cfg
Hbase.img
Hrelease.img
Etc.
Working
Directory
boot.cfg
Hbase.img
Hrelease.img
Etc.
Working and Certified
contents are different.
The switch runs
from Certified.
Working
Directory
revised_boot.cfg
Hbase.img
Hrelease.img
Etc.
Certified
Directory
boot.cfg
Hbase.img
Hrelease.img
Etc.
Certified
Directory
boot.cfg
Hbase.img
Hrelease.img
Etc.
Working
Directory
revised_boot.cfg
Hbase.img
Hrelease.img
Etc.
Working and Certified
contents are different.
The
reload working
command overrides
the default; the
switch runs from
Working.
