IPMS Application Example
Configuring IP Multicast Switching
page 23-14
OmniSwitch 6624/6648 Network Configuration Guide
April 2004
5
Modify the leave timeout from its default value of 10 seconds to 120 seconds by entering:
-> ip multicast leave-timeout 120
An example of what these commands look like entered sequentially on the command line:
-> ip multicast switching
-> ip multicast static-neighbor 5 1/5
-> ip multicast static-querier 5 1/2
-> ip multicast membership-timeout 3600
-> ip multicast leave-timeout 120
As an option, you can use the
show ip multicast switching
,
show ip multicast neighbors
, and
show ip
multicast queriers
commands to confirm your settings as shown below:
-> show ip multicast switching
IPMS Configuration
IPMS State:
Enabled
Hardware Routing:
Disabled
Priority:
high
Max Ingress Bandwidth:
10
Leave Timeout:
120
Membership Timeout:
3600
Neighbor Timeout:
90
Querier Timeout:
260
Query Interval:
125
Default Proxy Version:
IGMPv2
-> show ip multicast neighbors
Source IP
VLAN Slot/Port Expire Type
Version
--------------------+----+---------+------+-------+-------
None
5
1/5 Never Static
IGMPv2
->show ip multicast queriers
Source IP
VLAN Slot/Port Expire Type
Version
--------------------+----+---------+------+-------+--------
None
5
1/2 Never Static
IGMPv2