Managing Authentication Servers
Server Defaults
OmniSwitch 6624/6648 Network Configuration Guide
April 2004
page 17-3
Server Defaults
The defaults for authentication server configuration on the switch are listed in the tables in the next
sections.
RADIUS Authentication Servers
Defaults for the
aaa radius-server
command are as follows:
* The port defaults are based on the older RADIUS standards; some servers are set up with port numbers
based on the newer standards (ports 1812 and 1813 respectively).
LDAP Authentication Servers
Defaults for the
aaa ldap-server
command are as follows:
Description
Keyword
Default
Number of retries on the server before the
switch tries a backup server
retransmit
3
Timeout for server replies to authentication
requests
timeout
2
UDP destination port for authentication
auth-port
1645*
UDP destination port for accounting
acct-port
1646*
Description
Keyword
Default
The port number for the server
port
389 (SSL disabled)
636 (SSL enabled)
Number of retries on the server before the
switch tries a backup server
retransmit
3
Timeout for server replies to authentication
requests
timeout
2
Whether a Secure Socket Layer is configured
for the server
ssl | no ssl
no ssl
