Configuring GMAP
Using Interswitch Protocols
page 8-10
OmniSwitch 6624/6648 Network Configuration Guide
April 2004
Configuring the GMAP Hold Time
The GMAP hold time specifies the length of time the switch retains information received in GMAP update
packets. By default, the holdtime interval is 4320 minutes (72 hours).
To display the current holdtime interval, enter the following command:
-> show gmap
To change the holdtime interval, use either of these forms of the command with the desired value (any
value between 1 and 65535). Note that use of the
time
command keyword is optional. For example:
-> gmap hold 500
-> gmap hold time 250
Displaying GMAP Statistics
Use the
show gmap
command to view statistics for all MAC addresses.
-> show gmap
GMAP is currently enabled,
GMAP Holdtime Interval (minutes) = 4320,
GMAP Updatetime Interval (seconds) = 300,
GMAP Gaptime Interval (milliseconds) = 133
MAC Address Protocol VLAN
Src Switch ID Timeout(sec)
--------------+---------+------+--------------+------------
000502:c07f11 1809B
12
0020da:ecc770
3536
800
12
0020da:ecc770
3536
00105a:1873b9 1809B
12
0020da:ecc770
3536
800
12
0020da:ecc770
3536
See the
OmniSwitch CLI Reference Guide
for information about the
show gmap
command.
