Configuring QoS
Creating Policies
OmniSwitch 6624/6648 Network Configuration Guide
April 2004
page 21-33
To test a theoretical condition against the set of applied policies, enter the command with the
applied
keyword. The switch will display information about the potential traffic and attempt to match it to a policy
(applied policies only). For example:
-> show policy classify l3 applied source ip 143.209.92.131 destination ip
198.60.82.5
Packet headers:
L2:
*Port
:
0/0
->
0/0
*IfType
:
any
->
any
*MAC
:
000000:000000
->
000000:000000
*VLAN
:
0
->
0
*802.1p
: 0
L3/L4:
*IP
:
143.209.92.131
->
198.60.82.5
*TOS/DSCP
: 0/0
Using applied l3 policies
Classify L3:
*Matches rule ‘r1’: action a1 (drop)
In this example, the display indicates that the switch found an applied rule,
r1
, to classify Layer 3 flows
with the specified source and destination addresses.
To activate any policy rules that have not been applied, use the
qos apply
command. To delete rules that
have not been applied (and any other QoS configuration not already applied), use the
qos revert
command. See
“Applying the Configuration” on page 21-46
.