Static Link Aggregation Overview
Configuring Static Link Aggregation
page 10-6
OmniSwitch 6624/6648 Network Configuration Guide
April 2004
See
“Configuring Static Link Aggregation Groups” on page 10-7
for information on using Command Line
Interface (CLI) commands to configure static aggregate groups and see
“Displaying Static Link Aggrega-
tion Configuration and Statistics” on page 10-16
for information on using CLI to monitor static aggregate
groups.
Relationship to Other Features
Link aggregation groups are supported by other switch software features. The following features have CLI
commands or command parameters that support link aggregation:
•
VLANs
. For more information on VLANs see
Chapter 4, “Configuring VLANs.”
•
802.1Q
. For more information on configuring and monitoring 802.1Q see
Chapter 9, “Configuring
802.1Q.”
•
Spanning Tree
. For more information on Spanning Tree see
Chapter 5, “Configuring Spanning Tree
Parameters.”
Note.
See
“Application Example” on page 10-14
for tutorials on using link aggregation with other
features.
