Alcatel 1660SM, Installation Handbook, Page: 116 / 140

ED 03
8DG 15436 BAAA 116/140
ITT CANNON CONNECTOR :
(See Figure 89. on page 116)
•
Thread the plastic outer sleeve and pierce block onto the stripped cable
•
Lay the insulated wires and drain wire in the appropriate slots in the pierce block and trim excess
wire flush with the underside of the flange
•
Align the connector body with the plastic parts, place them in the jaws of the termination tool and
close the tool to complete the assembly
Signal
Screen
1 - BODY
2 - IDC CONTACT
3 - PIERCE BLOCK
4 - PLASTIC OUTER SLEEVE
5 - CABLE
Legenda:
(1) (2) (3) (4) (5)
Figure 89. ITT Cannon Balum assembly instruction
4.45. RJ11 Telephone extension Connections
(Refer to Figure 90. on page 117).
These connections are directly made on the connectors mounted on the “Service unit (SERVICE)” inserted
into slot 11.
•
Connect the RJ11 male connector (1AB 00428 0001) onto connector T1.
4.46. RJ45 Telephone extension Connections
(Refer to Figure 90. on page 117).
These connections are directly made on the connectors mounted on the “Service unit (SERVICE)” inserted
into slot 11.
•
Connect the RJ12 male connector (1AB 004289 0002) onto connector T2.
4.47. Phone Jack
(Refer to Figure 90. on page 117).
The connection is made on the front plate of the “Service unit (SERVICE)”.