Alcatel 1660SM, Installation Handbook

Page: 13 / 140

ED 03
8DG 15436 BAAA 13/140
2. UNPACKING AND WAREHOUSING
2.1. General
The following procedures have been issued and must be observed when unpacking the equipment.
The reciprocal operation must be done for repacking. In such case it is recommended to use the original
packing material.
The following sturdy outer packing material is utilized in order to protect the equipment against mechanical
and climatic stresses to which they are subjected:
wooden crates for transport by ship, air, on road for periods longer than 60 days
ply-wood crates for transport by ship, air, on road for periods of 30 to 60 days
cardboard boxes for transport by air or on road for periods of less than 30 days
2.2. Unpacking
2.2.1. Preliminary checks
The following information should be printed on the outer crate:
•
International symbols
side up :
keep dry
fragile
•
trade mark/address of the manufacturing company;
•
labels (or templated marks) indicating information on the contract and destination site of the
product;
•
an envelope holding among others the packing list
Upon receipt check:
•
that the final destination of the crates is that indicated on the label;
•
that no damage was made to the cases
Report any shipping damages to the Company’s representative or the Shipping Agent.