Alcatel-Lucent MDR-8000, User Manual, Page: 46 / 130

4-36
Figure 4 - 20 Audio 1 Provisioning (Sheet 2 of 2)
AUDIO 1:
AUDIO 2:
RS-232
MCS
TMN
Channel 3 MCS Transport RF/Rptr PPP Transport RF/Rptr
Channel E-Lead Off -GND
Level M-Lead 0/0 Norm
Address A12A J308/J309 Input Clocks
RSS
J310 Modem J308/J309 Termination RDS/RAS/RCD
Channel 1 Channel 2 Repeater D/1
Channel E-Lead All Call Detect Off -GND DTMF
Level M-Lead 2-Wire Auto Squelch 0/0 Norm 00 Address
Radio Configuration Service Channel WaySide DS1 Facilities DS3 Facilities
Alcatel User Interface – [System, DS3, and DS1 Provisioning -- MDR-8000 DS3]
File View Setup Options
F6
Performance Alarm Status
F4
Analog Monitor Station Alarm
F7
Provisioning
F9
User Control
F8 F5
Prov. Save
F3
Thursday, March 7, 2000 1:27:15 PM USI Version R1.03 Controller Version R1.03 MDR-8000 3-DS3
ELMC Address:
ELMC Description:
J7914
DURANGO
LOCAL DS3 PROVISIONING
Communicating***
DOUBLE CLICK TO ENABLE
(000 DISPLAYS). ENTER 3-DIGIT
STATION CALL NUMBER. OPERATOR
CAN DIAL THIS NUMBER AND RING/
COMMUNICATE WITH THE STATION
VIA ORDERWIRE. SELECT
OFF TO
DISABLE DTMF.
WHEN All Call Detect IS SELECTED, ALL TELEPHONES
RING WHEN CALL IS INITIATED. WHEN All Call Detect IS
NOT SELECTED, TELEPHONE ASSOCIATED WITH RADIO
WILL NOT RING. USEFUL IN SITUATIONS WHERE MULTIPLE
RADIOS ARE CONNECTED AT ONE SITE.
MDR-1035B
09/16/04
DTMF ALLOWS YOU TO DIALUP AND RING OTHER SITES USING THE 2-WIRE
HANDSET. ONLY THE RINGING IS DETECTED. COMMUNICATION OVER THE
HANDSET IS PARTY-LINE. DTMF ADDRESSING IS A LOCAL FUNCTION NOT A
NETWORK FUNCTION, THEREFORE, IF ONE OR MORE RADIOS ARE ASSIGNED
THE SAME DTMF ADDRESS, THEY WILL ALL RING WHEN THAT ADDRESS IS
DIALED.
TO BE ABLE TO USE THE DTMF FUNCTION:
1. AUDIO 1 MUST BE SELECTED FOR 2-WIRE HANDSET OPERATION.
2. DTMF MUST BE TURNED ON (CHECKED) ON THE AUDIO PROVISIONING
SCREEN.
3. 2-WIRE HANDSET MUST BE CONNECTED TO TEL JACK ON CONTROLLER
MODULE.
4. RADIOS MUST BE PROVISIONED WITH DTMF ADDRESS.