Alcatel-Lucent IP Touch 4068 User Manual Download Page 69

Page: 69 / 78

4. Select the melody you wish to use on the set from the 16 available options by pressing the

corresponding softkey.
The selected melody is played on the speaker.
Pressing the up or down arrow on the navigator (

) provides access to additional

melodies

5. Confirm your melody by pressing the OK fixed key.

The screen displays Programming accepted

Figure 4.12: Selecting the Ringing Melody

4.3.4.2

Adjusting the Ringing Level

1. In the menu page, navigate to: Settings -> Phone -> Ringing

2. Enter the password and press the Apply softkey.

The screen displays the Ringing page

3. Press the Level softkey.

The screen displays the Ringing level page and the speaker plays the melody at the
selected level

4. Press the - softkey to decrease the ringing level.

Press the + softkey to increase the ringing level

5. Confirm your ringing level by pressing the OK fixed key.

The screen displays Programming accepted

& ' (!'

! "

4-9

Summary of Contents for IP Touch 4068















































































Search results

Summary of Contents for IP Touch 4068

Reviews:

Related manuals for IP Touch 4068

Brands by name

Popular brands

Alcatel-Lucent IP Touch 4068, User Manual

Search results

Summary of Contents for IP Touch 4068

Reviews:

Related manuals for IP Touch 4068

Brands by name

Popular brands