Alcatel-Lucent IP Touch 4068 User Manual Download

Page: 25 / 78

Figure 2.9: Conversation Screen Example

In this state, the attendant controls the conversation. Only the attendant can release the call by
pressing the Release softkey.

2.3.3

The Called Set is Busy

2.3.3.1

The Busy Set is Multiline (with a Free Line)

Note:

A multiline set with a free resource is seen as free by the attendant set.

The user is in conversation with an internal or external party. After dialing the directory number
of the called party, the screen displays:

Figure 2.10: Telephone Area Example (the Called Set is Busy but Informed of the Second

Call)

The following softkeys are available:

Ring

To activate ringing on the called set

Release

To release this user

Call back

To send a call-back request to this user

2.3.3.2

The Busy Set is a Single Line Set (or Multiline with All Lines Busy)

#$ % ! #

! "

2-7

Summary of Contents for IP Touch 4068















































































Search results

Summary of Contents for IP Touch 4068

Reviews:

Related manuals for IP Touch 4068

Brands by name

Popular brands

Alcatel-Lucent IP Touch 4068, User Manual

Search results

Summary of Contents for IP Touch 4068

Reviews:

Related manuals for IP Touch 4068

Brands by name

Popular brands