Alcatel-Lucent 7450 ESS-7, Installation Manual

Page: 99 / 160

Installing IOMs and MDAs
7450 ESS-7 Page 99
Installing IOMs
Warnings and Notes
Warning:
• Electrostatic discharge (ESD) damage can occur if IOMs, SF/CPMs, or MDAs are
mishandled. Always wear an ESD-preventive wrist or ankle strap and always connect an
ESD strap to the grounding plug on the front of the chassis.
• Always place router components on an anti-static surface.
• Do not power up the 7450 ESS-7 router until all components are installed and verified.
• Blank panels and faceplates are required in all empty card and component slots to prevent
excess dust accumulation and to help control airflow and electromagnetic interference.
Faceplate blanks do not have board components or connector pins.
Notes:
General :
• Chassis slots, IOM, and MDA type information can be configured prior to the component
installation.
• IOMs do not have LEDs.
• Do not force an IOM into a SF/CPM slot.
• Do not force a SF/CPM into an IOM slot.
7450 ESS-7 :
• The 7450 ESS-7 card slots are horizontally oriented.
• IOMs are designed to fit in slots 1 through 5.