Alcatel-Lucent 7450 ESS-7, Installation Manual

Page: 52 / 160

Unpacking the Chassis
Page 52 7450 ESS-7
U
NPACKING THE
C
HASSIS
U
NPACKING
P
RECAUTIONS
Review this section to avoid injury or damage to the 7450 ESS-7:
• An empty 7450 ESS-7 chassis is approximately 60 lbs. (
27.22 kg)
. The chassis is shipped
with the fan and filter trays as well as the AC or DC PEMs installed. To prevent injury or
damage to the chassis, it is recommended that at least two people remove the switch from
the shipping crate and mount it into a rack.
• Do not load components into the chassis until it is rack mounted.
• The chassis is shipped in a heavy corrugated cardboard container protected by a foam cap
and base. Do not discard the packaging container and materials used in shipping. The
packing materials should be re-used if it is necessary to relocate the chassis.
• Keep the 7450 ESS-7 wrapped in the anti-static packaging until you are ready to install the
system.
• Keep the arrows on the shipping container pointing up.