Alcatel-Lucent 7450 ESS-1, Installation Manual

Page: 75 / 92

Connections and Configurations
7450 ESS-1 Page 75
Specifying the Power Type
If you connect DC power in either the DC/DC or AC/DC models, you must change the default for
the power supply configuration to reflect the DC unit(s) in the CLI in order to facilitate proper
operation for the LEDs, show command, and logging output.Refer to the
7450 ESS OS System
Guide for command syntax and usage information.
CLI Syntax:
config>system
power-supply {1|2} {dc|ac {single|multiple}|none}
Example
:
ALA-1>config>system# power-supply 1 dc
ALA-1>config>system# power-supply 2 dc
The following example displays the
power-supply
command configuration:
ALA-1>config>system# info
-----------------------------------------------------------------
..
name "ALA-1"
contact "Fred Information Technology"
location "Bldg.1-floor 2-Room 201"
clli-code "abcdefg1234"
coordinates "N 45 58 23, W 34 56 12"
power-supply 1 dc
power-supply 2 dc
exit
..
-----------------------------------------------------------------
ALA-1>config>system#