Alcatel-Lucent 7450 ESS-1, Installation Manual

Page: 33 / 92

Site Preparation
7450 ESS-1 Page 33
Country-Specific Requirements
Table 10: Power Cord Set Requirements -- By Country
Country Accredited
Agency
See Applicable
Note Below
Australia EANSW 1
Austria OVE 1
Belgium CEBC 1
Canada CSA 2
Denmark DEMKO 1
Finland SETI 1
France UTE 1
Germany VDE 1
Italy IMQ 1
Japan JIS 3
Norway NEMKO 1
Sweden SEMKO 1
Switzerland SEV 1
United Kingdom BSI 1
United States UL 2
Notes:
1.
The flexible cord must be a harmonized (HAR) Type HO5VV-F, 3-conductor cord with a
minimum 0.75 mm
2
conductor size. The power cord fittings (the appliance coupler and wall
plug) must bear the certification mark of the agency responsible for evaluation in the country
where it is used.
2.
The flexible cord must be min Type SVT or equivalent, No. 18 AWG, 3-conductor. The wall
plug must be a two-pole (3-pin) grounding type with a NEMA 5-15P (15A, 125V) or NEMA
6-15P (15A 250V) configuration.
3.
The appliance coupler, flexible cord, and wall plug must bear a "T" mark and registration
number in accordance with the Japanese Dentori Law. The flexible cord must be Type VCT or
VCTF, 3-conductor, 0.75 mm
2
conductor size. The wall plug must be a two-pole grounding
type with a Japanese Industrial Standard C8303 (15A, 125V) configuration.