Swimming Pool Heat Pump Inverboost C /
9
Anti-vibration bases
1. Take out 4 Anti-vibration bases
2. Install them on the bottom of machine.
Water Inlet & outlet connection
1. Install the two joints like the picture
shows
2. Screw them onto the water Inlet &
outlet connection
Mains Cable wiring
1. Open the top cover of the heat pump.
2. Connect the cables in the correct
terminal according to electric diagram.
Filtration pump wiring
(Dry contact)
1. Open the top cover of the heat pump.
2. Connect the cables in the correct terminal
according to electric diagram.
Draining plug
1. Install the draining plug under the
bottom panel
2. Attach the drain hose to the drain
connection through which the
condensate accumulated in the heat
pump base will drain.
Note: Lift the heat pump to install the.
Never overturn the heat pump, it could
damage the compressor.
4.3.
Accessories Installation
