Swimming Pool Heat Pump Inverboost C /
17
7.4.
Display Controller Operation
NOTE: When the heat pump connects to the power, the LED display shows a code for 3 seconds
which indicates the heat pump model.
7.4.1.
button
Press
to start the heat pump unit, the LED display shows the desired water temperature for
5 seconds, then shows the inlet water temperature and the operation mode.
Press
to stop the heat pump unit and show “OFF”.
Notice: During the parameter checking and setting, press the
to quick-exit and save the current
setting .
Press
again to turn on/off the machine.
7.4.2.
button
Automatic mode:
There are 3 modes for the unit, Heating only, Auto mode (heating and cooling switch), Cooling only.
You can switch Heating only and Auto mode by pressing
for 5 seconds, no matter the unit is on
or off. (default: Smart mode).
Press
for 5 seconds again to exit automatic mode and switch to heating mode (default: Smart
mode)
Note: Under Automatic mode, it is useless to set parameter P1 .
