Alberici HIRA ONE, Operator'S Manual

Page: 15 / 28

15
(**) By b and - , locate the number you want to write, and press OK to confirm it; the cursor will automatically move to the
next character. Once confirming the last digit, also confirm the whole number entered: it is proposed to enter the second number,
and finally the third.
(***) When the Service Status Remote Enable function is active, the machine can be put out of service by sending an SMS (text is
“CMD=OFF”) from any of the 3 enabled cellular phones. To restore service, send text “CMD=ON”.
(****)When the Remote Pament function is active, and the Security Level has been set to Low, it is possible to command the machine
to dispense an amount (in €) or a number of tokens (pieces) by sending the following sms text from any of the 3 enabled cellular
phones:“OUT=n°” (n° = any value between 0 and 250).
When the Remote Pament function is active, and the Security Level has been set to High, it is possible to command the machine to
dispense an amount (in €) or a number of tokens (pieces) by sending the following sms text from any of the 3 enabled cellular
phones:“OUT=n°:1234” (n° = any value between 0 and 250; 1234 = any combination of figures except 0). In this case, the display
will show the password chosen: the User will put the Refill key in the Refill lock (or the RFID key in its reader), and then enter the
password by using the buttons SEL (select each number) and OK (confirm each number).
7.3.7 Empty out the Hoppers
Use this function to make the selected hopper pay out all the contained coins / tokens. Once emptied
the first hopper, total dispensed amount shall be displayed. Press OK to go on with second hopper.
7.3.8 Restore default configuration
To use this sub-menu it is necessary to digit the PIN code.
WARNING: in case of reset, the system sets back to default configuration. The PIN code will be
reset to the default 0000 setting. Account records shall not be cancelled.
Exit
EMPTY OUT
HOPPER
S
EMPTY
HOPPER
1
total
nnn,nn €
EMPTY
HOPPER
2
total
nnn,nn €
RESTORE DEFAULT
CONFIGURATION
Enter PIN
0…
DEFAULT CONFIG
.
RESTORED
This message will briefly appear after the
PIN has been entered, then the message
DEFAULT CONFIGURATION RESTORED
will
be shown again.
www.saxxot.de