Alberici HIRA ONE, Operator'S Manual

Page: 12 / 28

12
7.3.6 Setting up the peripheral units
This menu allows to set up the denominations accepted by the note validator and by the coin
acceptor, as well as the value of the coins/tokens dispensed. It also permits to set the change mode
as either automatic or manual, and to enable/disable the full/void sensors of the hoppers.
7.3.6.1 N
OTE
V
ALIDATOR SETUP
The board automatically detects the presence of the note acceptor during initial check. All the
programmed note values (5-to-100 Euro) get automatically enabled. To modify this default
condition, press OK to get to the first option (ex. 5 €) and highlight it, then press UP or DOWN to
reverse its state
. Press OK to shift to the next option (ex. 10 €).
Set up
Note validator
Set up
Coin acceptor
P
ERIPHERAL UNITS
SETUP
EMPTY OUT
HOPPERS
< 5 > 10 20 50 100
OK OK OK OK OK
5 < 10 > 20 50 100
OK OK OK OK OK 5 10 < 20 > 50 100
OK OK OK OK OK
< 5 > 10 20 50 100
NO OK OK OK OK
< 2,00 > 1,00 0,50
OK OK OK
< 2,00 > 1,00 0,50
NO OK OK
2,00 < 1,00 > 0,50
OK OK OK
2,00 1,00 < 0,50 >
OK NO OK
Set up
Dispense mode
Level sensors
enabled
Level sensors
disabled
Set up
COINS
Set up
TOKENS
Set up Hopper 1 :
1,00 €
(*)
Press Down or Up
to modify amounts in
discreet steps of 0,05
€ each
Dispensing mode
AUTOMATIC
(*)
Dispensing mode
MANUAL
5 < 10 > 20 50 100
NO OK OK OK OK
2,00 < 1,00> 0,50
NO OK OK
Exit
Set up
GSM / GPRS
Set up
Note validator
< 5 > 10 20 50 100
OK OK OK OK OK
< 5 > 10 20 50 100
NO OK OK OK OK
5 < 10 > 20 50 100
OK OK OK OK OK 5 10 < 20 > 50 100
OK OK OK OK OK
www.saxxot.de