Albemarle 288 EXPRESS FISHERMAN, Owner'S Manual

Page: 34 / 122

288 OBXF
34
Macerator
Supplies electrical current to the holding tank macerator
pump. This breaker should be in the “OFF” position except
when pumping out the holding tank.
Water Pressure
Supplies 12-volt electrical current directly to the fresh water
pump pressure switch located on the pump. The pressure
switch automatically controls the water pump when the system
is activated and properly primed.
Shower Pump
Supplies 12-volt electrical current directly to the shower sump
pump.
Refrigerator
Supplies 12-volt electrical current to the refrigerator.
Stereo
Supplies 12-volt electrical current to the stereo in the helm.
Head
Supplies 12-volt electrical current to the switches in the head
compartment that control the marine toilet.
Forward Bilge Pump
Supplies 12-volt electrical current to the forward bilge pump
switch in helm switch panel enabling the operator to manually
activate the forward bilge pump. The automatic switch is
always supplied current when the batteries are connected.
Bilge Pump Aft
Supplies 12-volt electrical current to the aft bilge pump
switch in helm switch panel enabling the operator to manually
activate the aft bilge pump. The automatic switch is always
supplied current when the batteries are connected.
Additional Fuses and Circuit Breakers
Engine Circuit Breakers
There are circuit breakers and or fuses located on each engine
that provide protection for the engine, engine charging
system and other accessories unique to the engines installed
in your boat. Please refer to the engine owner’s manual for
information on the fuses or circuit breakers installed on your
engines.
4.3 120-Volt System
The 120-volt AC system is fed by the shore power outlet to the
onboard inlet. It is wired totally separate from the 12-volt DC
system and is equipped with an on-board galvanic isolation
system. 120-volt current is available and distributed to the
AC accessories through individual circuit breakers located
in the AC panel. The main breaker in the panel protects the
system from an overload and the reverse polarity lights in the
panel and on the cabinet near the panel indicate any problems
due to an improper shore power supply. All AC outlets in
the cabin are protected by ground fault interrupts to protect
against electrical shock. A cord set is provided to supply
power from the shore power outlet to the boat’s AC system.
TO REDUCE THE RISK OF ELECTRICAL SHOCK IN
WET WEATHER, AVOID MAKING CONTACT WITH
THE SHORE CABLE OR MAKING A CONNECTION
TO A LIVE SHORE OUTLET. NEVER SPRAY WATER
ON ELECTRICAL CABLES WHILE WASHING DOWN
DECKS.
AC Power Inlet and Telephone/Cable TV Inlet Below Port Gunnel