PM845GV1/ PM845GE1/ PM845GL/1 PM845GL1-533
26
APIC Mode
By enabling this option, “MPS version control” for OS can be configured.
Options: Disabled, Enabled (default).
MPS Version Control for OS
The 1.1 version is the elder version, which supports 8 more IRQs in Windows NT.
Choose the new 1.4 version for Windows 2000 and XP. Options: 1.1, 1.4 (default).
OS Select For DRAM > 64MB
Select OS2 only if you are running the OS/2 operating system with greater than 64MB
of RAM on the system. Options: Non-OS2 (default), OS2.
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technology that enables a PC,
in some cases, to predict the future failure of storage drives.
Options: Disabled (default), Enabled.
Small LOGO (EPA) Show
This option enables you to choose show or hide the small LOGO of EPA. Options:
Disabled (default), Enabled.
Advanced Chipset Features
Dram Timing Selectable
Set the way to select the dram timing. Choose Manuel, the following options become
adjustable. Options: Manuel, By SPD (default)
CAS Latency Time/ Active to Precharge Delay/DRAM RAS # to
CAS# Delay/ DRAM RAS # Precharge
This item determines CAS Latency. When synchronous DRAM is installed, the number
of clock cycles of CAS latency depends on the DRAM timing. Do not change this field
from the default value specified by system engineer. Options: 1.5, 2, 2.5, 3 and By
SPD(default).
Refresh Mode Select
Select the refresh mode. Options: 15.6, 7.8, 64, Auto (default).
Turbo Mode (only for PM845GV1)
Allows you to activate the turbo mode. Options: Disabled (default), Enabled.
Memory Frequency For
This option allows you to set the memory frequency. Options of PM845GE1: Default,
DDR 333, 266, for PM845GV1/ PM845GL1/ PM845GL1-533: Default, DDR 266, 200.
