PM845GV1/ PM845GE1/ PM845GL/1 PM845GL1-533
31
HOT Key Power ON
This option allows you to use the Ctrl key along with a hot key (function key) to power
on your system. Options: Ctrl – F1, Ctrl – F2, Ctrl – F3, … to Ctrl – F12.
Onboard FDC Controller
Select “Enabled” if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If you install an add-in FDC or the system has no
floppy drive select “Disabled”. Options: Enabled (default), Disabled.
Onboard Serial Port 1
Select an address and corresponding interrupt for the first serial port. Options: Disabled,
3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Auto.
Onboard Parallel Port
This item allows you to determine the onboard parallel port controller I/O address.
Options: Disabled, 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7.
Parallel Port Mode
This item allows you to select a parallel port mode for the on board parallel port.
EPP
Using Parallel Port as Enhanced Parallel Port.
ECP (default)
Using Parallel Port as Extended Capabilities Port.
SPP
Using Parallel port as Standard Printer Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.
Normal
EPP Mode Select
Select EPP port type 1.7 or 1.9 (default).
ECP Mode Use DMA
Select a DMA Channel for the port. Options: 3 (default), 1.
Game Port Address
Set the Game Port I/O Address. Options: Disabled, 201 (default), 209.
Midi Port Address
Set Midi Port Base I/O Address. Options: Disabled, 330, 300 (default), 290.
Midi Port IRQ
Set the Midi Port IRQ. Options: 5, 10 (default).
