manualshive.com logo in svg

Albatron PM845GE1, User Manual

Share
Download
Albatron PM845GE1 User Manual Download Page 37

 
 
 

PM845GV1/ PM845GE1/ PM845GL/1 PM845GL1-533 

 

34 

RTC Wake Up 

When “Enabled”, you can set the date and time at which the RTC (real-time clock) 

alarm awakens the system from Suspend mode. For Windows based system, if you have 
scheduled any tasks as part of the “Scheduled Tasks” function, RTC Wake Up will be 
disabled. Options: Enabled, Disabled (default). 

 

Date (of Month) Alarm 

Select a date of month. Set 0 if you prefer to set a weekly alarm. 
 

Time (hh:mm:ss) Alarm 

Set the time you want the alarm to go off. 
 

USB KB Wake Up From S3 

This item allows you to awake the system from suspend mode by USB keyboard. 

Options: Enabled, Disabled (default). 

 

Ring Wake up 

This item allows you to allow modem devices to awaken the system from suspend mode. 

Options: Enabled, Disabled (default). 

 

Reload Global Timer Events 

When a system goes into suspend mode, certain devices must be inactive for a period of 

time. Conversely, if any of those devices have any activity, the system will awaken. You 
can select the devices that will participate I suspend/ power-on activity by configuring 
these fields. Devices include: Primary IDE 0/ Primary IDE 1/ Secondary IDE 0 / 
Secondary IDE 1/ FDD, COM, LPT Port /PCI PIRQ [A-D]# 

Options: Enabled, Disabled (default). 

Summary of Contents for PM845GE1














































Reviews:

No comments

Brands by name

Popular brands

Load more brands