PM845GV1/ PM845GE1/ PM845GL/1 PM845GL1-533
25
Advanced BIOS Features
Virus Warning
This item allows you to choose the VIRUS warning feature for IDE Hard Disk boot
sector protection. If this function is enabled and someone attempts to write data into this
area, BIOS will display a warning message on the screen and sound an audio alarm
(beep). Options:
Disabled (default) Virus protection is disabled.
Enabled
Virus protection is activated.
CPU L1 & L2 Cache
Make CPU internal cache active or inactive. The system will slow down if you disable
this item. Options: Enabled (default), Disable.
CPU Hyper-Threading
(this item only displays if you are
using the PM845GV1 or GE1 with a CPU that supports HT)
Use this field to enable or disable Hyper-Threading. Options: Disabled (default),
Enabled.
Quick Power On Self Test
Allows the system to skip certain tests while booting. This will decrease the time needed
to boot the system. Options: Enabled (default), Disabled.
Swap Floppy Drive
If the system has two floppy drives, choose “Enabled” to assign physical drive B to
logical drive A and vice-versa. Options: Disabled (default), Enabled.
Boot Up NumLock Status
Selects power on state for NumLock. Options: On (default), Off
Typematic Rate Setting
When “Enabled”, the “typematic rate” and “typematic delay” can be configured.
Typematic Rate determines the keystroke repeat rate used by the keyboard controller.
Options: Disabled (default), Enabled
Typematic Rate (Chars/Sec)
The rate at which character repeats when you hold down a key.
Options: 6 (default), 8,10,12,15,20,24,30.
Typematic Delay (Msec)
The delay before keystrokes begin to repeat. Options: 250 (default), 500,750,1000.
