manualshive.com logo in svg

Albatron PM845GE1, User Manual

Share
Download
Albatron PM845GE1 User Manual Download Page 4

 
 
 

PM845GV1/ PM845GE1/ PM845GL/1 PM845GL1-533 

 

1 

Chapter 1. Introduction 

Introduction 

Congratulations for choosing from the recent line of high performance mainboards: 
the PM845GV1/ PM845GE1/ PM845GL1/ PM845GL1-533. These mainboards were 
designed to take advantage of the latest industry technology to provide you with the 
ultimate solution in data processing. In the tradition of its predecessors, these 
mainboard continue a commitment to reliability and performance and strives for full 
compliance and compatibility with industry software and hardware standards. These 
mainboards contain on board I/O facilities, which include a parallel port, a VGA port, 
a PS/2 mouse port, a PS/2 keyboard port, audio ports, 4 USB ports (two require a 
bracket), a LAN port, and a game port. They also contain on board IDE facilities for 
IDE devices such as hard disks and CD-ROM Drives. These mainboards all support 
the Pentium

® 

4 CPU, an industry leading processor. They also comply with the PC 

Micro-ATX form factor specifications. This mainboard supports the most popular 
operating systems such as Windows

®

 9X/ ME/ 2000/ XP. 

 
 

Specification 

CPU 

 

Supports Socket-478 Pentium

®

 4 processors 

 

The PM845GV1/ PM845GE1 supports Hyper-Threading Technology 

 

Speed 

 

PM845GV1/PM845GE1/PM845GL1-533 supports Front Side Bus 400/533 MHz 
PM845GL1 supports Front Side Bus 400 MHz 

 

33MHz 32-bit PCI slot 

 

The PM845GE1 supports AGP 4X (AGP 2.0) data transfer mode 

 

Flash Memory 

 

Supports flash memory functionality 

 

Supports ESCD functionality 

 

Shadow RAM 

 

Mainboard is equipped with a memory controller providing shadow RAM 
and support for ROM BIOS. 

 

Summary of Contents for PM845GE1














































Reviews:

No comments

Brands by name

Popular brands

Load more brands