KX400+ series mainboard
56
PWRON After PWR-Fail
This option determines whether you want to restart the system after a power failure,
select “On”, to boot the system whether or not the system was on before power
failure. Choose Former-Sts, to restore the system to the status before the power
failure.
Options: Off (default)
、
On, Former-Sts.
PS2KB Wake Up Select
Use this option to configure the PS2 keyboard Wake Up feature.
“Password” Use this selection to force user to enter a password after the system
awaken from PS2 keyboard activity. Press the enter key to enter a
password.
“Hot Key” Use PS2KB key to awake the system. See “PS2KB Wake Up from
S3-S5” to configure the hotkey.
PS2KB Wake Up from S3-S5
This option is used when “PS2KB Wake Up Select” is configured as “HOT KEY”.
Options: Disable, Ctrl+F1(to F12), Power, Wake, Anykey.
USB Wake Up
This item allows you to select USB devices to awaken the system from suspend
mode.
Options: Disabled (default)
、
Enabled
VGA
When set to “On”, any event occurring at a VGA Port will awaken a system which
had been previously powered down. Options: OFF (default)
、
On.
LPT & COM
When this option is set to On, any event occurring at a COM(serial)/LPT (printer)
port will awaken a system which has been powered down.
Options: LPT/COM (default)
、
COM
、
LPT
、
NONE.
HDD & FDD
When set to “On”, any event occurring on a hard drive activity or a floppy drive will
awaken a system which had been previously powered down. Options: ON (default)
、
OFF
PCI Master
When set to “On”, you need a LAN add-on card which supports the power function. It
should also support the wake-up on LAN jumper. Options: OFF (default)
、
ON.
