KX400+ series mainboard
25
Hard Disk Connectors: IDE1/IDE2
This mainboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode
0~4, Bus Master, and Ultra DMA / 33, Ultra DMA / 66, Ultra DMA / 100, Ultra DMA /
133 functionality. It has two HDD connectors, IDE1 (primary) and IDE2
(secondary).
IDE1 (Primary IDE Connector)
You can connect up to two hard drives to IDE1. If you attach two drives, you must
use a ribbon cable with three connectors. You must also configure one drive as the
master and one drive as the slave, using the jumpers located on each drive.
IDE2 (Secondary IDE Connector)
The IDE2 controller can also support a Master and a Slave drive. The configuration
is similar to IDE1. The second drive on this controller must be set to slave mode.
The layout is KX400+ PRO
VI
A
VT
8
36
7
VI
A
VT82
35
1
2
3
4
_
0
+
ONONONON
1
IDE1
IDE2
