K8X800 PRO II Mainboard
37
Onboard Serial Port 1
Select an address and corresponding interrupt for the first serial port.
Options: Disabled
、
3F8/IRQ4 (default)
、
2F8/IRQ3
、
3E8/IRQ4
、
2E8/IRQ3
、
Auto
serial port.
、
3F8/IRQ4
、
3E8/IRQ4
、
2E8/IRQ3
、
Auto.
fra Red (IR) standard to be used.
xD,TxD Active
and TxD frequencies. This field only configurable if “UART Mode” is
isable IR transmission delay. This field only configurable if “UART
ode” is set to “ASKIR” or “IrDA”. Options: Enabled (default)
、
Disabled
ex mode permits simultaneous
x mode permits transmission in only one direction at a time.
is set to “ASKIR” or “IrDA”.
his item allows you to determine the parallel port interrupt and address.
78/IRQ5
、
3BC/IRQ7
、
Disabled
his option allows you to select an operating mode for the on board parallel port.
pabilities Port.
Normal
Onboard Serial Port 2
Select an address and corresponding interrupt for the second
Options: Disabled
、
2F8/IRQ3 (default)
UART Mode Select
This item allows you to select the In
Options: Normal (default)
、
ASKIR
、
IrDA
R
This item determines the RxD
set to “ASKIR” or “IrDA”. Options: Hi/Lo (default)
、
Hi/Hi
、
Lo/Hi
、
Lo/Lo
IR Transmission Delay
This item allows you to enable/ d
M
UR2 Duplex Mode
Select the transmission mode used by the IR interface. Full-dupl
bi-directional transmission. Half-duple
his field only configurable if “ UART Mode”
T
Options: Half (default)
、
Full
Onboard Parallel Port
T
Options: 378/IRQ7 (default)
、
2
Parallel Port Mode
T
Options: ECP(default)
Extended Ca
EPP Enhanced Parallel Port.
SPP Standard Printer Port.
ECP+EPP ECP & EPP mode.
