K8X800 PRO II Mainboard
49
New installation of Windows
®
200
using a Serial ATA drive as the
boot device.
Follow the instructions in this section if you are
and you wish to boot from a drive attached to th
nnector.
1.
Copy the “VIA Serial ATA Driver” from
e bundle CD Driver to a floppy disk.
【
CD File
Location Path => D: \ Driver \ SATA\ Driver Disk\ …… (includes 2 files and 2 folders.)
】
2.
Power off the system. Connect the SATA hard disk to one of the SATA connectors. Power up
the system.
3.
Place your Windows 2000/XP CD into the CD-ROM/DVD drive. When the “Windows Setup”
screen displays, press “F6”.
4.
Press 's' when setup asks if you want to specify an additional device. Insert the floppy disk
which includes the “VIA Serial ATA Driver” into the floppy drive.
Press 'Enter' and select the appropriate OS
5.
Press 'Enter' again to continue the setup pro
6.
Follow the setup instructions and select your choice for partition and file system.
7.
After setup examines your disks, it will cop files to the Windows 2000/ XP installation folders
and restart the system. After the system is rebooted the setup program will continue with the
installation all the way to completion.
8.
Wait until Windows 2000/ XP finishes installing devices, regional settings, networking settings,
components, and the final set of tasks. Reboot the system if you are asked to do so.
0/XP
performing a new installation of Windows
®
2000/XP
e SATA co
th
device driver.
cess.
y