K8X800 PRO II Mainboard
29
CAS latency
This item determines CAS Latency. When synchronous DRAM is installed, the number of clock
. Do not reset this field from the default value
tem des
er.
.0
、
2.5
、
3
elect the DRAM delay time when being read.
cks
、
3 Bus Clocks
、
4 Bus Clocks
、
5 Bus Clocks
、
6 Bus Clocks
、
7 Bus Clocks
his item allows you to select DRAM Active to Precharge Delay.
s Clocks
、
15 Bus Clocks
ptions: 2 Bus Clocks
、
3 Bus Clocks
、
4 Bus Clocks
、
5 Bus Clocks
、
6 Bus Clocks
raphics Port (AGP) aperture. The aperture is a portion of the PCI
emory address range dedicated for graphics memory address space. Host cycles that hit the aperture
y translation.
ault)
、
64M
、
32M
ode. Options: 1X
、
2X
、
4X
、
8X
option.)
ally set the AGP output buffer drive strength. By
set the AGP output buffer driver strength.
hile the AGP Driving Control option is set to “Manual”, it allows the user to set AGP Driving
Value. Options: 9B (default)
、
00~FF
cycles of CAS latency depends on the DRAM timing
ecified by the sys
ign Options: 2
sp
RAS# to CAS# delay (tRCD)
S
Options: 2 Bus Clo
Min RAS# active time (tRAS)
T
Options: 6 Bus Clocks
、
13 Bus Clocks
、
14 Bu
Row precharge Time (tRP)
arge.
You can set the time to prech
O
AGP Aperture Size
Select the size of the Accelerated G
m
range are forwarded to the AGP without an
Options: 1G
、
512M
、
256M
、
128M (def
(The 1G and 512M options only appear when you install 8X AGP card.)
AGP Mode
This item allows you to select the AGP M
(*If you install the 8X AGP card, then the item will be lock in 8X
AGP Driving Control
By choosing “Auto” the system BIOS will automatic
choosing “Manual”, it allows user to
AGP Driving Value
W
