K8X800 PRO II Mainboard
50
C
1. Power cable is
3. Po
ilure.
Solu
2. R
3. C
er or replace fuse.
t
syste
Cau
ed from the slot on the mainboard.
1. Po
. Using even pressure on both ends of the DIMM, press down firmly until the module snaps into
lace.
roblem 3:
ystem does not boot from the hard disk drive but can be booted from the CD-ROM drive.
auses:
. Connector between hard drive and system board unplugged.
. Damaged hard disk or disk controller.
. Hard disk directory or FAT is corrupted.
olutions:
. Check the cable running from the disk to the disk controller board. Make sure both
curely attached. Check the drive type in the standard CMOS setup.
. Contact technical support.
. Backing up the hard drive is extremely important. Make sure you periodically perform backups to
oid untimely disk crashes.
hapter 4: Troubleshooting
Problem 1:
No power to the system. Power light does not illuminate. Fan inside power supply does not turn on.
Indicator lights on keyboard are not lit.
Causes:
unplugged.
2. Defective power cable.
wer supply fa
4. Faulty wall outlet; circuit breaker or fuse blown.
tions:
1. Make sure power cable is securely plugged in.
eplace cable.
ontact technical support.
4. Use different socket, repair outlet, reset circuit break
Problem 2:
Sys em inoperative. Keyboard lights are on, power indicator lights are lit, hard drive is active but
m seems “hung”
ses: Memory DIMM is partially dislodg
Solutions:
wer Down
2
p
P
S
C
1
2
3
S
1
ends are
se
2
3
av
