Albany 350016-0000, Owner'S Manual

Page: 5 / 25

5 Nov. 2006
SAFETY PRACTICES
WARNING
THOROUGHLY READ THESE SAFETY PRACTICES PRIOR TO INSTALLING,
OPERATING, OR SERVICING A HIGH-SPEED, RAPID-ROLL™ DOOR. FAILURE TO
FOLLOW THESE SAFETY PRACTICES MAY RESULT IN PROPERTY DAMAGE,
PERSONNEL BODILY INJURY, OR DEATH.
1.
Do not operate a RAPID-ROLL™ Door while you are under the influence of drugs or alcohol.
2.
Do not use the door if any parts appear to be broken or damaged.
3.
Stay clear of the door while it is operating.
4.
Keep hands and feet clear of the door at all times.
5.
Do not drive through the door opening unless door is completely open.
6.
Maintain a clear door opening at all times. Keep the door opening free of any obstructions.
7.
Remove power at the fused disconnect during all electrical or mechanical service. OSHA requires
a disconnect to be properly tagged and locked out during all maintenance or service of equipment.
8.
All electrical troubleshooting or service must be performed by a qualified electrician or service
person and must meet all applicable local, state, federal, international, and other governing agency
codes.
9.
USE EXTREME CAUTION when it is necessary to service the control panel while it is
energized.
10.
If you have any questions, please contact your local Albany service provider for assistance.
Otherwise contact Albany Door Systems at 1-877-925-2468 for information on your local
distributor.