Albalá Ingenieros SMC2000C01, Manual

Page: 20 / 28

Albalá Ingenieros | Manual SMC2000C01
The following functions of the SMC2000C01 can be performed remotely:
- Configuration of the datarate and the operating mode for the ports.
- Supervision of the status of the links that are established in each port.
4.3.1. Details of the SMC2000C01 registers
The SMC2000C01 module provides control and status registers that can be read and
written by means of specific commands described in the communication control
module user manuals.
The parameter information grouped in the CONTROL or RAM sections is stored in
volatile memory. Any modifications to the parameters will be lost when the module
power supply is disconnected unless the "EEPROM Save" button within the software
has been pressed.
The STATUS section parameters are read-only and cannot be modified.
The parameters that can be controlled and supervised remotely for each version of
the firmware are listed below:
VERSION 1.X
CONTROL
Name add ext msk snmp trap Description
MSK_SFP_PRES 0x00 0x01 N N SFP present mask
0=Disabled, 1=Enabled
MSK_SFP_FAULT 0x00 0x02 N N SFP laser fault mask
0=Disabled, 1=Enabled
MSK_SFP_LOS 0x00 0x04 N N SFP loss of signal mask
0=Disabled, 1=Enabled
MSK_P1_ETH 0x00 0x08 N N Port 1 link down mask
0=Disabled, 1=Enabled
MSK_P2_ETH 0x00 0x10 N N Port 2 link down mask
0=Disabled, 1=Enabled
MSK_PO_ETH 0x00 0x20 N N Optical Port link down mask
0=Disabled, 1=Enabled
P1_ETH_MODE 0x02 0x07 Y N Ethernet mode in Port 1
7=Auto, 0=10Mbps HD, 4=10Mbps FD, 1=100Mbps HD, 5=100Mbps FD,
2=1Gbps HD, 6=1Gbps FD
P2_ETH_MODE 0x03 0x07 Y N Ethernet mode in Port 2
7=Auto, 0=10Mbps HD, 4=10Mbps FD, 1=100Mbps HD, 5=100Mbps FD,
2=1Gbps HD, 6=1Gbps FD
PO_ETH_MODE 0x04 0x01 Y N Ethernet mode in Optical port
1=2.5Gbps, 0=1Gbps
STATUS
Name add ext msk snmp trap Description
SFP_PRES 0x01 0x01 Y Y SFP module present
1=OK, 0=Fail
SFP_FAIL 0x01 0x02 Y Y Indicates a laser fault
0=OK,1=Fail
SFP_LOS 0x01 0x04 Y Y SFP loss of signal
0=OK,1=Fail
SFP_DIAG_SUPPORT 0x01 0x08 Y N SFP mod. supports diagnostics
1=OK, 0=Fail
20