Albalá Ingenieros SMC2000C01, Manual

Page: 12 / 28

Albalá Ingenieros | Manual SMC2000C01
• The SMC2000C01 is used with optic transmitter modules that contain laser
diodes. These modules are CLASS 1 LASER products. Due to its features these
devices are inherently safe. However, exercise CAUTION as there is invisible
laser radiation in the fiber optic connectors. Avoid exposure to the beam.
NEVER lift or remove the cover of the SMC2000C01's optical connectors
except to connect a fiber optic connection, and be sure that the power is off
when doing so. NEVER leave optical connections that are carrying signals
disconnected from the equipment. NEVER examine a fiber optic connector
with a microscope without being absolutely certain that no optical signal is
present, as this could cause serious damage to the retina.
• This equipment must be connected to a mains outlet with a protective
earth connection. Never use extension cords that do not have protective
earthing connection. The lack of an effective electrical connection between
the ground pin in the mains input connector of the equipment and the
protective earth of the electrical power distribution can cause serious harm.
• All modules of the Albalá Ingenieros TL2000 terminal line can be
hot-plugged or unplugged without suffering any damage or affecting the
processes that are currently taking place in other modules in the same
mounting frame.
• The SMC2000C01 module and the mounting frame should always be
installed, maintained, operated and removed by personnel with sufficient
technical qualifications. The equipment should never be placed in damp
areas, near splashing liquid, or in explosive or corrosive atmospheres.
Neither modules nor mounting frames can be used in applications that
could endanger human life.
3.3. Environmental considerations
This symbol indicates that this equipment must be deposited at a collection
point for proper waste treatment once it has reached the end of its useful
life.
3.4. Installation of SFP modules
The SMC2000C01 features receptacles to install optional SFP modules for signal
transmission or reception over optical fiber or other functions. To install or uninstall one
of these modules in the equipment, follow the instructions given below.
To install, insert the SFP module into the receptacle and slide it carefully until it clicks,
indicating that the module has reached its final position.
To uninstall, first remove any optical or electrical cables that are connected to the SFP
module. Then lift the metal ring located at the opening of the SFP module to disable the
12