Albalá Ingenieros SMC2000C01, Manual

Page: 13 / 28

Albalá Ingenieros | Manual SMC2000C01
module's retention mechanism and release it. Finally, pull module carefully out of its
receptacle.
There are different types of SFP modules. Make sure that module to be installed is
appropriate for the receptacle that will contain it.
3.5. Installing the module in the mounting frame
The following steps should be followed in order to install a SMC2000C01 module in the
mounting frame.
1 - Remove the blank panel covering the front of the empty slot chosen for installing the
SMC2000C01 in the mounting frame.
2 - Insert the SMC2000C01 module into the front of the mounting frame. The edges of
the card slide into two plastic guides inside the mounting frame.
3 - Secure the module to the mounting frame using the two front screws.
After these steps, the module is ready to be connected to other equipment.
13