Albalá Ingenieros SMC2000C01, Manual

Page: 11 / 28

Albalá Ingenieros | Manual SMC2000C01
3. INSTALLATION
THE SMC2000C01 MODULE CONTAINS ELECTRONIC DEVICES SENSITIVE TO
ELECTROSTATIC DISCHARGE. Always use antistatic bags clearly identified
with a high degree of shielding for storage and transportation.
3.1. Initial inspection
Verify that the package has been properly handled during transport. After opening the
packaging, check that the SMC2000C01 module is inside.
You must notify your Albalá Ingenieros distributor or dealer of any damage or defects
observed.
Follow the instructions in this manual to install this module in the mounting frame.
3.2. Safety instructions
When the module incorporates any optional SFP optic fiber transmitter provided by
Albalá Ingenieros, the SMC2000C01 is a CLASS 1 LASER product as per the IEC 60825-1
standard. Please read the safety instructions included in this manual carefully before
using this module.
• The SMC2000C01 may contain an SFP fiber optic transmitter module with
laser diodes. These modules are CLASS 1 LASER products. Due to its features
this device is inherently safe. However, exercise CAUTION as there is
invisible laser radiation in the module's fiber optic connectors. Avoid
exposure to the beam. NEVER lift or remove the cover of the SMC2000C01's
optical connectors except to connect a fiber optic connection, and be sure
that the power is off when doing so. NEVER leave optical connections that
are carrying signals disconnected from the equipment. NEVER examine a
fiber optic connector with a microscope without being absolutely certain
that no optical signal is present, as this could cause serious damage to the
retina.
11